PerfectPelmet Pelmet and Cornice Jig

  • £8.00
    Unit price per 
Tax included. Shipping calculated at checkout.


BUY 3 FOR £20 - DISCOUNT APPLIED AUTOMATICALLY IN BASKET

NEW from PerfectPanel, the PerfectPelmet Pelmet and Cornice Jig holds your pelmet or cornice in place, whist at the same time setting the perfect overhang.

No more fumbling around with clamps that fall off and potentially damage worktops and provide inconsistent results.

We recommend using 3 jigs, 1 for each end, and one to secure and position as you move along putting fixings in.

You will need to know 3 measurements to order the correct jig:

1) Pelmet or Cornice thickness/height as looking at the front facing edge.

2) Door overhang. Usually door thickness plus 2mm.

3) Carcass thickness. Usually 18mm, but can sometimes be 19mm or greater (and sometimes 16mm).

PLEASE ALWAYS TEST JIG ON AN OFFCUT TO MAKE SURE IT DOES NOT DAMAGE THE PELMET/CORNICE FINISH, AND NEVER USE EXCESSIVE FORCE WHEN PUTTING THE JIG ONTO A PELMET/CORNICE

There is a hole in the top of each jig so it can be fixed to the top of a panel and hung on the side of a wall cabinet to get a 20/22/24mm top overhang.

Please note that as kitchen panel sizes do differ, a panel advertised at 18mm may be 19mm and the jig may not fit on the panel. In this case, you should use the next size up.

This product is 3D printed, and as such, printing lines are visible on the finished product. These do not affect functionality.

Customer Reviews

Based on 3 reviews Write a review
x