NEW SNUG FIT JIGS FEATURE TAPERED INTERNAL SIDES TO HOLD ONTO YOUR PANELS

This is a set of 15 colour coded measuring jigs for the most common kitchen panels widths.

This will allow you to get the exact overhang required for flush to door end panels when fitting kitchens.

By using another jig on its end placed against your offset jig at top and bottom of the panel, you can then use the included bronze scribing block to get the perfect scribe to the wall.

There is a hole in the top of each block so it can be fixed to the top of a panel and hung on the side of a wall cabinet to get a 20/22/24mm top overhang.

Please note that as kitchen panel sizes do differ, a panel advertised at 18mm may be 19mm and the jig may not fit on the panel. In this case, you should use the next size up.

This product is 3D printed, and as such, printing lines are visible on the finished product. These do not affect functionality.

PLEASE ALWAYS TEST JIG ON AN OFFCUT TO MAKE SURE IT DOES NOT DAMAGE THE PANEL FINISH, AND NEVER USE EXCESSIVE FORCE WHEN PUTTING THE JIG ONTO A PANEL

BUNDLE CONTENTS:

1 x Green 16mm Panel and 20mm Door Spacing (18mm door plus buffer)
1 x Blue 16mm Panel and 22mm Door Spacing (20mm door plus buffer)

PLEASE NOTE: the 16mm Panel Width, 24mm Door Spacing has been discontinued and is now replaced with 1 x Light Green 18mm Panel Width and 21mm Door Spacing

1 x Green 18mm Panel and 20mm Door Spacing (18mm door plus buffer)
1 x Blue 18mm Panel and 22mm Door Spacing (20mm door plus buffer)
1 x Red 18mm Panel and 24mm Door Spacing (22mm door plus buffer)

1 x Green 19mm Panel and 20mm Door Spacing (18mm door plus buffer)
1 x Blue 19mm Panel and 22mm Door Spacing (20mm door plus buffer)
1 x Red 19mm Panel and 24mm Door Spacing (22mm door plus buffer)

1 x Green 22mm Panel and 20mm Door Spacing (18mm door plus buffer)
1 x Blue 22mm Panel and 22mm Door Spacing (20mm door plus buffer)
1 x Red 22mm Panel and 24mm Door Spacing (22mm door plus buffer)

1 x Green 20mm Door Spacing “L” jig
1 x Blue 22mm Door Spacing “L” jig
1 x Red 24mm Door Spacing “L” jig

1 x Bronze Scribing Block with built in pencil sharpener

3 x Half Pencils

PLASTIC STORAGE BOX FEATURES:

Impact resistant box designed for your PerfectPanel Jigs. A smart two-part design means no breakable catches or hinges so your box will last longer. At 21mm deep internally, this box is the perfect size for your PerfectPanel jigs.

The box is designed not to crack or shatter even when subjected to severe impact at low temperatures.